2-3 TPD Radiator Separator Machine Copper And Aluminum Radiator

Radiator Separator Machine is very suitable for single-layer and double-layer copper tube radiators. Usually, it can process three different ranges of radiators: 19mm, 21mm and 25mm.

Performance characteristics of Radiator Separator Machine

1. It is suitable for dismantling and separating the inner copper and aluminum of waste air conditioner, old radiator and waste water tank.

2. The inner copper and aluminum of waste radiator can be separated to keep the original block shape.

3. The disassembly process is completed by one machine without other equipment.

4. The separation speed of copper tube and aluminum foil is fast, the work efficiency is high, the operation is simple and easy to maintain.

Processing of Radiator Separator Machine

1. Turn the Reversing Switch and check the rotating direction.

2. Inject oil into the two oil holes in the left and right side of the machine to lubricate transmission gears (normally once per 4 working hours).

3. Push different radiators into different Material Inlets according to their specs (19mm, 21mm, 25mm); the left side of radiators must touch the left side of Material Inlets; or, the right side of radiators must touch the right side of Material Inlets (the first copper pipe in the Lower Layer shall be nearer to the Guiding Ruler, different with Ⅳ.6); when radiators are pushed into Material Inlets, Feeding Gears will gnaw at radiators and take them into the machine.

4. After radiators are taken into the machine, copper pipes and aluminum are separated and come out of the machine automatically.

According to the layers of radiators and their height, adjust each pair of Adjusting Wheels on the machine (after adjusting, tighten screws below)